Process details
- Overview
- Flow measurement of fuel gas
- Flow measurement of liquid fuels
- Flow measurement of fuel gases
- Flow measurement of air
- Pressure measurement of air
- Intake air temperature measurement
- Flow measurement of spray water
- Furnace pressure measurement
- EGT temperature measurement
- Primary air flow measurement
- Drum level measurement
- Temperature measurement of hot steam
- Flow measurement of hot steam
- Pressure measurement of hot steam
- Temperature measurement of flue gas
- Temperature measurement of feed water
- Flow measurement of feed water
- Level measurement of feed water
- Pressure measurement of steam
- Level measurement of blow down tank
- Temperature measurement of condensate
- Level measurement of blow down tank
Cogeneration in industrial power plant
Process instrumentation for industrial CCGT plants
Cogeneration offers enormous potential for not only customers who can conserve energy but also for countries worldwide as they seek to maximise energy and increase efficiency. Cogeneration is defined as the combined simultaneous generation of two forms of useful heat and power (electrical or mechanical) with a common source of fuel, to result in a thermodynamically efficient use of the fuel. Power can be cogenerated in different ways prior to the delivery of thermal energy to a process. Power can also be produced from the recovery of process thermal heat, derived from exothermic process reactions and heat recovery from kilns, process heaters and furnaces.
Industrial Boiler with upstream Gas TurbineThe basic components of this cogeneration example are a gas turbine and a boiler with multi-fuel burner and forced draft fan system. The gas turbine-generator, having an outlet for providing turbine exhaust gas, is connected to the boiler as well as the back-up forced draft fan. Both systems supply all necessary combustion air under all operating conditions. Critical to this design is the balance between output and performance in both gas turbine and forced draft fan operating modes and requires sophisticated measurements, control and protection to guarantee a smooth switch-over.
Industrial Boiler with Forced Draft FanIndustrial boilers are responsible for most of the production sector’s energy demand, accounting for approximately 70% of their process energy use. These industrial boilers are responsible for supplying saturated and superheated steam as well as hot water to the adjacent production plant and also have to process the fuel gases or liquids released during the production process. The most important variables in this type of boiler systems are the steam and hot water conditions, plus the fuel and environmental constraints. Of equal importance is the type and chemical composition of the fuels to be used and the mandated emissions requirements for the specified plant site.
KROHNE not only supplies single instruments like the OPTISONIC 7300 ultrasonic gas flowmeter for measurement of operational flow or the ALTOSONIC V12 for flow measurement according to custody transfer requirements but also supplies complete fuel skids. The three beam OPTISONIC 3400 ultrasonic heat meter measures the supplied energy in form of hot water and is available with class 1 MI-004 certificate. The OPTISWIRL 4200 is an economic Vortex flowmeter and designed for utility applications and energy distribution monitoring in steam systems. With its integrated pressure and temperature sensor it can measure the steam enthalpy and even detect wet steam. Combined with a temperature sensor in the condensate return it represents an economic solution for energy measurement in steam distribution to allow energy/cost allocation between different parts of the production plant. Furthermore, KROHNE offers complete DP flow measurement solutions and flow computers. Special solutions also available include Venturi tubes, calibrated meter runs with flow nozzles according to ISO 5167 or ASME MFC 3-M, compact orifice assemblies or averaging pitot tubes for simple flow indication purposes. The OPTISONIC 8300 ultrasonic steam flowmeter is best suited for applications that require a big flow turndown or even bi-directional flow: this would be used for metering the steam supply to industrial parks or other plants, with superheated steam.
Requirements
- MI002, AGA9, OMLR 137
- Advanced diagnostics
- Short straight pipe requirements
Recommended products and solutions
Requirements
- MI005, OMLR 117, API
- No moving parts
- Independent of product variations
Recommended products and solutions
Requirements
- Pressure measurement of air
- Fast response
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Fast response
Recommended products and solutions
OPTIBAR PC 5060
Pressure transmitter for advanced process pressure and level applications
Requirements
- Vibration resistance
- fast response
Recommended products and solutions
OPTITEMP TCA-S50
Thermocouple (TC) temperature assembly for use in existing thermowells or machinery
Requirements
- High pressure
- High temperature
- Big dynamic flow range
Recommended products and solutions
Requirements
- Fast response
Recommended products and solutions
OPTIBAR PC 5060
Pressure transmitter for advanced process pressure and level applications
Requirements
- Vibration resistance
- dynamic calculations
- fast response
Recommended products and solutions
OPTITEMP TCA-S50
Thermocouple (TC) temperature assembly for use in existing thermowells or machinery
Requirements
- Big ducts
- Short straight pipe requirements
Recommended products and solutions
OPTIBAR PC 5060
Pressure transmitter for advanced process pressure and level applications
Requirements
- High pressure
- High temperature
- Gasphase compensation
Recommended products and solutions
Requirements
- dynamic calculations
- fast response
- vibration resistant
Recommended products and solutions
OPTITEMP TRA-T30
Resistance (RTD) temperature assembly for higher flow velocities and pressures
Requirements
- Process control and performance testing
- ASME PTC, IEC 60953
- redundancy, e.g. materials P91/P92
Recommended products and solutions
Requirements
- High pressure
- Low maintanance requirements
Recommended products and solutions
OPTIBAR PC 5060
Pressure transmitter for advanced process pressure and level applications
Requirements
- High temperatures up to 1100°C
- Suitable for flue gas applications
Recommended products and solutions
OPTITEMP TCA-S50
Thermocouple (TC) temperature assembly for use in existing thermowells or machinery
Requirements
- dynamic calculations
- fast response
- vibration resistant
Recommended products and solutions
OPTITEMP TRA-T30
Resistance (RTD) temperature assembly for higher flow velocities and pressures
Requirements
- Process control and performance testing
- ASME PTC, IEC 60953
- redundancy, e.g. materials P91/P92
Recommended products and solutions
Requirements
- High pressure
- High temperature
- Gasphase compensation
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
OPTIBAR PC 5060
Pressure transmitter for advanced process pressure and level applications
Requirements
- Local display
- Rendundant level transmitters
Recommended products and solutions
OPTIBAR DP 7060
Differential pressure transmitter for flow, level, differential pressure, density and interface measurements
Requirements
- Vibration resistant
Recommended products and solutions
OPTITEMP TRA-T30
Resistance (RTD) temperature assembly for higher flow velocities and pressures
Requirements
- Limited process access