19 mrt 2019

H250 M40 now with Foundation Fieldbus ITK 6.3

  • Installed FF devices can be upgraded in the field without opening the pipeline
  • Fastest function block execution times for variable area flowmeters

H250 M40

H250 M40 variable area flowmeter is now available with Foundation Fieldbus ITK 6.3

The functionality of the Foundation Fieldbus (FF) module for H250 M40 variable area flowmeter has been updated from Interoperability Test Kit 5.2 (ITK 5.2) to ITK 6.3. The new version has been tested and registered with the FieldComm Group, and has also passed the stress test on a DeltaV control system.

Since the introduction of the FF interface in 2012, several thousand devices have been put into operation. Customers who would like to update existing H250 M40 FF devices to ITK 6.3 can do so by ordering a new ITK 6.3 module and simply change it in the field without removing the device from the pipeline. As it is only a new firmware, all 32 international Ex approvals of H250 M40 are still applicable.

With ITK 6.3, NE107 compliant diagnostic messages have been implemented, and execution times of the function blocks have been significantly improved so that more devices can be polled for a given schedule (total cycle time of the bus system). It is possible to operate FF ITK 5.2 and ITK 6.3 devices simultaneously in one system. Each version requires its own driver (CFF/ DD/ DTM), which must be installed once per device type.

Foundation Fieldbus is a registered trademark of FieldComm Group.

Over KROHNE

KROHNE is een wereldwijd toonaangevende producent en leverancier van complete meetoplossingen voor industriële procesinstrumenten. Opgericht in 1921 met het hoofdkantoor in Duisburg, Duitsland, geleidelijk aan uitgegroeid tot een wereldwijde onderneming met meer dan 3900 werknemers. KROHNE staat voor innovatie en maximale productkwaliteit en is een van de marktleiders in industriële procesmeettechnologie.

Contact

Issued by:
KROHNE Messtechnik GmbH
Ludwig-Krohne-Str. 5
47058 Duisburg
www.krohne.com

Contact voor de media in Nederland en België:
Maré Boom
Tel:  +31 78 63 06 215
eMail: m.boom@krohne.com